Become a Licensed Roofing Contractor | Here’s How to Do It!

Roofers Can Use Local SEO

Written by Jeremy Earle, JD

May 5, 2022

We’re all too acquainted with a scenario, bad weather and wind ripping our shingles off our roofs, causing damage. Even if you don’t want to deal with leaks and draughts in your home’s exterior, this might negatively affect its appearance.

An easy remedy for many homes would be to contact a roofing contractor. A roofing contractor’s certification and licensing procedure vary greatly from jurisdiction to jurisdiction, and there is no industry-wide standard or certification.

If you’re interested in becoming a licensed roofing contractor, we’ll walk you through the process step-by-step in this article. Because this procedure varies greatly from state to state, finding the suitable method for your locality is vital; this is not a “one size fits all” scenario.

Yes, all roofing contractors must be licensed.

There are no industry-wide qualifications, certifications, or licenses required for roofing contractors, but the construction sector has become one of the most heavily regulated in the United States. Thus, each state has its contractor license regulations, specialty classifications, and criteria for applying to be a specialized contractor in that jurisdiction.

What matters is whether or if the roofer intends to work on a house or a business, in that order. Residential roofing contractors are only needed to complete their Residential Roofer New License Application in places like Minnesota before they can begin working. Commercial roofing contractors in Minnesota must be licensed on a state and local level to legally and lawfully operate on commercial roofing projects within Minnesota.

This is a mandatory aspect of the procedure in 32 states as of the writing of this article. However, the other 18 states need a contractor’s license at all levels, including state, county, and local. In theory, any state might impose licensure requirements on its citizens at two levels, or perhaps all three.

A Guide to Becoming an Experienced and Qualified Roofer

If you want to work as a roofing contractor, you must meet a broad range of additional qualifications and criteria. The following are only a few of the possible requirements:

  • Indemnity insurance documentation is also required.
  • Documentation proving your eligibility for unemployment benefits.
  • Documentation of successful completion of any required residential, business, or industrial assessments.
  • It’s important to provide proof of your liability and property damage coverage.
  • A copy of your surety bond, if you have one.
  • Evidence of a qualified party or construction supervisor’s license
  • Incorporation or Partnership Agreement. Your copy.

Aspiring Roofers’ Step-by-Step Guide

Studying the Art of Roofing

To become a certified roofing contractor, the first step is to ensure that you have the necessary physical roofing abilities. There are many different contractors out there, and each one requires a certain set of skills and abilities.

A cheerful and accessible demeanor is essential when dealing with customers, as it lets them know they can come to you with any queries or problems they may have. It is common for people to learn roofing “on the job” or via practice, while others choose to attend college classes relevant to the work.

Although the latter option is more time-consuming, the skills that you will develop for not just one profession, but likely a range of others, more than makeup for this time invested and maybe a major advantage to your career in several ways.


For roofing contractors, having enough insurance for both yourself and the company is critical to avoiding potential claims involving human injury or property damage, such as when repairing a roof.

A whole portion of the National Roofing Contractors Association’s website is devoted to the topic of roofing contractor insurance. About this page, you’ll find information on what you’ll need and a list of firms that can offer it.

Participating in a National or Regional Organization.

After receiving their license, many roofing contractors take the crucial step of joining a national or regional roofing organization. As a member of a national or regional roofing association, not only will you gain credibility and become more noticeable in a crowded field of roofers, but you will also be kept abreast of any, and all changes to the rules and regulations that may affect your business should you choose to join.

Requirements for Roofing Licenses vary from State to State.

Please take this information with a grain of salt. However, it is not meant to be construed as legal advice, and you should always consult with local authorities before making any business choices based on this information. There is no guarantee that requirements and rules will remain the same for long.


The first step to becoming an Alabama roofing and sheet metal contractor is obtaining a state license. The Licensing Board for General Contractors issues this state license, and to be eligible, commercial projects worth $50,000 must be completed.

Alternatively, you may be qualified for employment in your own home valued at least $10,000. There is also a trade test that must be passed in addition to the other two exams. Proof of at least three roofing jobs completed within the last three years is required.


The Division of Corporations, Business and Professional Licensing, and the Department of Commerce, Community, and Economic Development both need a state license for roofing contractors in Alaska before they may operate.

Proof of liability insurance, worker’s compensation insurance, and a $5,000 bond are allrequired to get a non-residential license from the state. A residential license may be obtained if you finish the Alaska Craftsman Home Program and pass a test within two years of applying for the license.


A state license from the Arizona Registrar of Contractors, or ROC, is required to commence roofing work in the state. For residential and commercial roofing in Arizona, specialized permits are required. In addition, you’ll have to pass a trade test, produce a financial statement, and present proof of worker’s compensation and a surety bond as part of the application process.


A state license is required in Arkansas for any construction work valued at more than $2,000 to be carried out at all. In Arkansas, the Contractors Licensing Board issues both business and residential Home Improvement contractor licenses. Additional requirements for obtaining an unrestricted license include submitting a financial statement and proof of workers’ compensation insurance.


If you want to work on roofing jobs costing more than $500 in California, you’ll need a California contractor’s license. California requires that you pass an exam to get a roofing license. For this reason, you must have at least four years of roofing experience in the last 10 years of employment before you may apply. To get a roofing license in California, you will also need a $15,000 surety bond.


Roofers in Colorado are considered “general contractors” and so do not need a state roofing license to operate. However, a business license is a must. In addition, it is important to verify your local rules since they may vary from place to place.


To operate as a “home improvement contractor” in Connecticut, you must register with the Department of Consumer Protection, separate from a state license for roofing contractors. There is a one-time registration charge for this agency.


The Delaware Division of Revenue requires all roofing contractors in Delaware to register and get a business license for any work over $50,000. Additionally, the Division of Facilities Management issues a Class B Asbestos Abatement Certification, which requires the completion of an authorized training course.


To become a licensed roofing contractor in Florida, you must first pass a background check. The Department of Business and Professional Regulation will award this “Division 2 Contractor License.” You’ll have to take and pass a test to get your license, and you can only sit for it if you’ve worked in your field for at least four years. In addition, you’ll need to provide proof of financial stability and insurance coverage.


In Georgia, a state license is required for any roofing job costing more than $2,500. A license from the Georgia State Board of Construction Industry Licensing is required for this job. If you want to become a licensed professional, you must pass a trade test and a business and law exam. For this test, you’ll need pre-approval, proof of two years’ worth of experience, the completion of two projects in your field, and proof of insurance.


An official Hawaii C-42 Roofing Contractor License is needed before any roofing work can begin. Department of Commerce and Consumer Affairs Professional Licensing is responsible for this. In addition to passing a business and legal test, you must also pass a trade exam. A minimum of four years of supervisory experience during the last 10 years is required to take this test.


Idaho does not need a roofing contractor to be licensed by the state. To work legally in Idaho, you must first be registered with the Idaho Contractors Board. This board does not need any prior work experience, formal education, or test. Your company details and proof of insurance will also be required.


In Illinois, how can you become a licensed roofer? It is necessary to get a roofing license in Illinois before getting started. Department of Professional Regulation is the body responsible for issuing this permit. Residential, Commercial, and Commercial/Industrial licenses are all available; however, you must pass the Residential licensing test before applying for these licenses. There are three categories of licenses. Qualifications for applying include:

Passing the state test (if relevant).

Providing proof of insurance (if applicable).

Furnishing a $10,000 surety bond (if applicable).


Roofing contractors in Indiana are not required to be licensed by the state. Do not forget to look into any additional local regulations relevant to you before beginning any roofing work.


The Iowa Division of Labor requires all construction contractors in Iowa who earn more than $2,000 a year to be registered. Proof of unemployment insurance is required. However, there is no state test to take. Unless you’re dealing with asbestos, a state license isn’t necessary for most roofers.


A roofing contractor registration certificate issued by the Kansas Attorney General is required of all roofers in Kansas. It is essential that you also have proof of liability and worker’s compensation insurance.


In Kentucky, there are no mandatory licenses for roofing contractors. There are additional advantages to being a certified member of the Kentucky Roofing Contractors Association.


Building construction for more than $75,000 and home remodeling or repair worth more than $7,500 need a state license in Louisiana. The Louisiana State Licensing Board for Contractors provides these business and residential licenses and home improvement registrations. In addition to the business and legal exams. Proof of general liability and workers’ compensation insurance is also required.


Roofing contractors in Maine are not required to be licensed by the state unless they operate with asbestos. A Conditional Asbestos Abatement License from the Department of Environmental Protection is necessary for this circumstance.


Roofing contractors in Maryland do not require a state license to provide their services. A state license may be required for certain roofing work that falls under “Home Improvement,” but not all. The Maryland Home Improvement Commission, or MHIC, is responsible for issuing this license. You’ll need two years of work experience and a passing score on the test to apply for this license. In addition, you’ll need to provide proof of your insurance coverage.


Roofers in Massachusetts are required to be licensed by the State Board of Building Regulations and Standards to work in the state of Massachusetts. However, if you operate mostly on existing buildings and do not plan to build anything new shortly, you require state registration. However, there is an examination for the Construction Supervisor’s License test. The test must be passed, and you must also have three years of relevant professional experience.


Department of Licensing and Regulatory Affairs requires all roofing contractors to be licensed. The term “Residential Maintenance and Alteration” applies to this roofer’s operation permit. You must first complete 60 hours of classroom instruction and then pass an examination to be eligible to apply.


As previously mentioned, the rules for residential and commercial roofing construction vary in Minnesota.

What It Takes To Pass The Certification Exam For Roofers State licensing is necessary if you earn more than $15,000 per year in Minnesota. The Minnesota Department of Labor and Industry has approved this permit. Obtaining a license as a residential roofer requires passing a trade test and submitting proof of insurance and a $15,000 surety bond.


The Mississippi State Board of Contractors requires a Home Roofing License if your residential roofing services are valued at more than $10,000 in Mississippi. Additionally, you’ll need to pass a business and legal test. Before you may be authorized, you must also disclose your financial details and produce proof of insurance.


There are no explicit state regulations for roofing contractor work in Missouri. If you live in a region where municipal regulations still exist, it’s crucial to check them out.


Roofing contractors in Montana are similarly exempt from any statewide regulations. Contractors and subcontractors in the building industry who have workers must register with the Department of Labor and Industry (DOLI). Even if you don’t have any workers, it’s still possible to register, although it’s no longer mandatory.


Roofers in Nebraska are not obliged to register with the Nebraska Department of Labor. Still, all general contractors and subcontractors in Nebraska are required to do so, regardless of whether or not they specialize in building or repair work.


A-C-15a Roofing Contractor License granted by the State Contractors Board is necessary for roofing contractors in Nevada. You must have at least four years of work experience in the last 10 years to be pre-approved to take the test. Some of these years of experience may potentially be replaced by education. Finally, you’ll have to produce proof of worker’s compensation insurance and prove your financial stability. Only then will you be allowed to take the required tests for commerce, business, and law.

New Hampshire

A roofing contractor license is not necessary for the state of New Hampshire unless you are dealing directly with asbestos. Local regulations should, of course, be taken into consideration before embarking on any project.

New Jersey

In New Jersey, you do not need a contractor’s license to do roofing, but you must register with the state. In addition, in New Jersey, roofing work on one- and two-family houses no longer needs a building permit as of March 2018.

New Mexico

Roofers in New Mexico are referred to as “Construction Contractors,” which means that the state must license them before they can begin working. You must have two years of relevant work experience before you may sit for the necessary test. In addition to passing the business and law exams, you must also pass the trade exam.

New York

Roofers in New York are not needed to be licensed by the state before they may begin their job. However, as previously indicated, it is important to thoroughly investigate any local restrictions.

North Carolina

A state license is required for roofing contractors in North Carolina, but only if the project is worth more than $30,000. The North Carolina Licensing Board for General Contractors issues this license. Before taking the test, you will need to be pre-approved. If you want to bid on future tasks, you’ll need to show that you have enough operating capital to cover your expenses.

North Dakota

There are a lot of rules and regulations in place in North Dakota if you want to carry out roofing projects costing more than $4,000 in the state. The Secretary of State of North Dakota issues licenses in four different categories, each of which is based on the scope of the work you intend to do. In this state, there is no test requirement, but you must be able to prove that you do not owe any taxes and have proof of worker’s compensation and liability insurance.


No state license is required to operate as a roofing contractor in Ohio, as in many other states on our list. As with prior posts, we strongly recommend verifying your local regulations before doing any work.


If you are a roofing contractor in Oklahoma, you don’t need a state license to do your job. You will, however, be required to register as a Roofing Contractor. You will need to provide worker’s compensation and liability insurance documentation to be registered and issued the equivalent of an Oklahoma roofing license.


The state must license roofing contractors in Oregon before they begin working. Before the Construction Contractors Board awards you a license, you must complete pre-licensing training and pass an exam. Proof of general liability and workers’ compensation insurance is also necessary.


Before beginning work, roofing contractors in Pennsylvania are not required to acquire a state license. You should still check into the local rules for roofing contractors in your region before commencing any work.

Rhode Island:

A state license is necessary to become a roofing contractor in Rhode Island. The Rhode Island Contractors’ Registration and Licensing Board has given this license. Exams are required and a minimum of 10 hours of roofing education every year to get licensed. Proof of insurance and bonding are also required.

South Carolina

Roofing contractors in South Carolina must be licensed by the South Carolina Department of Labor, Licensing, and Regulation before they may begin work in this field unless they fall under “Residential Speciality Contractor.” As a condition of registration, you must provide references and a surety bond in $5,000.

South Dakota:

Roofing contractors in South Dakota are not required to be licensed by the state. The standards for a roofing contractor in South Dakota may be different from those in other states.


Roofing contractors in Tennessee must have a state license to work on any projects valued more than $25,000 in the state as of January 2014. This requires passing a trade test and business and legal examinations, which are all prerequisites. A financial statement and proof of general liability insurance and proof of worker’s compensation insurance must also be provided.


Roofing contractors in Texas are not required to be licensed by the state to do their service. A voluntary licensure procedure is available via the Texas Roofing Contractors Association if this is something you’re interested in.


The Utah Department of Commerce Division of Occupational and Professional Licensing requires a state license for all construction contractors, including roofing contractors. For this, you must pass a business and legal test in addition to a trade exam. A minimum of four years of professional experience is required before you can sit for this test. It’s also necessary to prove general liability and workers’ comp insurance.


Roofing contractors in Vermont are not required to have a state license to do their services. As usual, we recommend that you check with your local contractor requirements before undertaking this task, as this might impact it.


Virginians must have a state license given by the Utah Department of Commerce Division of Occupational and Professional Licensing for roofing contractors to work in the state. As a final step, you’ll need to pass a trade test and specialized business and legal exams. A minimum of four years of experience in the field is required before you can sit for this test. You must also provide proof of general liability and workers’ compensation insurance.


Roofing contractors in Washington State are not required to get any kind of state license to begin work. This state’s Department of Labor and Industries Contractors’ Registration Section requires you to be registered if you’re a contractor.

West Virginia:

Roofing contractors in West Virginia must first get a state license before they may begin work. It is given by the West Virginia Contractor Licensing Board of the Department of Labor. Additionally, you’ll need to pass a trade test and examine your knowledge of business and law. Besides this, you must also have proof of worker’s compensation coverage.


Wisconsin does not need roofing contractors to be licensed by the state before they may perform their services. However, the Asbestos Unit Bureau of Public Health requires that you be certified if you operate near asbestos.


When it comes to roofing contractors in Wyoming, there are no state licensing requirements. If you live in this state, we believe you must go beyond the state’s criteria and consider your local ones.

You May Also Like…